!
.

HARVESTING TECHNIQUE
Increased productivity, high- quality grain threshing , reduced costs, reduced maintenance time - all of this was implemented in the new improved version of the SKIF 280 Superior combine harvester.
Ideal for medium and large farms, the Skif 280 Superior reliably works on all types of grain, corn and sunflower in all climatic conditions.
Its the modern combine that combines in it - high reliability, advanced technology and innovative system solutions that ensure minimal fuel consumption and low- cost of bunker grain. The new ZP 63Light Effective reaper, with fingers of reel made of high-strength polymer, even in low-yielding fields, ensures careful and efficient feeding of the plant mass to the combine harvester-cutting unit (MCP). Two-drum threshing system with hexagonal straw -shaker, in which an additional CSP straw-turner cylinder is installed, two-stage cleaning ensure the high productivity of the harvester with minimal grain losses.
Due to the increased volume of the bunker of 8.1 m³, the time between the discharge increases, this is positively reflected in the high productivity of the combine.
The AGCO Power 634 DSBA / AGCO Sisu Power 744 CTA-4V with a capacity of 280 hp is installed on the combine, which, together with a 450 liter - tank, allows the combine to work more than 12 hours without refueling. The sufficient excess power ensures stable operation even at high operating loads. The three-speed gearbox with hydrostatic transmission provides a maximum transport speed of 25 km / h, which reduces the non-productive transport time.
The panoramic, comfortable Premium Plus cabin due to the ergonomic arrangement of devices, a wide range of seat adjustment with the control panel and steering column, air conditioning and heater options make it possible to create comfortable conditions for efficient work.
The Skif 280 Superioir has maximum automated control system for the operating organs and the information system with the Sentry 6510 performance monitor, firm Teejet Technologies, which reduce the operator's work, increasing the productivity of gathering .
SKIF 280 Superiors capacity is 12 kg / s.

Lattice mill

Harvester for harvesting corn

Total separation area, including :
4,5 2
Working width in standart
6,3
- empty glume (haffer sieve), 2
- grain (shoe sieve), 2
2,3 + 0,4
1,8
Reels diametr,
1,05
Straw-carrier fan
electric
Turnover frequency of reel ,rpm

0...50
Scrap breaking spreading unit for straw
+
Drive of reels turnover
hydraulic
Corn tank

Regulation of reels displacement
hydraulic
Volume , 3
8,1
Quantity of double stroke by hand-agregates knife , moves per minute
1020
Loading height ,
4,4
Reels revers
hydrostatic
ENGINE
AGCO Power 634 DSBA/AGCO Sisu Power 74 CTA-4V
Threshing separating unit

Power , ..
260 (276)
Threshing drum

Frequency of turnover , rpm
2000
Width ,
1,33
Quantity of cylinders , pc.
6
Diameter ,
0,5
Volume of fuel bank , l
450
Quantity of whips ,
8
ransmission

Frequency range of turnover
rpm

400 ... 1150
Drive
hydrostatic
Range of turnover
600...1300

3
Regulation of speed rotation
Electric
Max speed ,
km/hours
25
Rice harvesting set
Option
Speed range

Pre-threshing drum

on 1 range , km/hours
0...6,6
Width , 젠
1,33
on 2 range , km/hours
0...10,7
Diameter,
0,4
on 3 range , km /hours
0...25
concave

Turning radius ,
8
Quantity of strips , pc.
12
Full drive
Option
The area of separation of the main concave
0,62
tires

Angle of the grip
105
Front
650/65R38 1578
Clearance adjustment range ,
6...42
Back
480/65R24 1338
Clearance control
Electric
Width of the track:



Front wheels ,
2,78
The area of separation of the previous drum/the total area of separation during threshing , 2
0,41/1,03
Rear wheels ,
2,61 (2,8 4 WD)
Straw rack

base,
3920
Keys , pc
6
Cabine

Straw racks area of the separation , 2
6,3
Cab type
Premium Plus
Cylinder -straw kicker CSP
+
Combiner seat
Fixed lux class
Overall dimensions

Assistants seat
firmware
Length with harvester /without harvester ,
10,7/9,05
heater
+
Width with harvester /without harvester ,
6,9/3,5
Air conditioning
+
Height ,
3,95
Noise level, dmb
No more 80
Mass with harvester ,
14300
Steering column
Adjusted down the angle of inclination and height of the steering wheel position





Harvester for harvesting corn KMS
Machine provides low cut and high quality of grinding corns stalks at optimum harvesting speeds. Modern design of the units, simple and reliable in operation machine , due to its versatility, KMS-8 easily and quickly aggregates with all combine harvesters using transitional frames and aggregate kits. Modifications of the KMS-6 harvester also allow to be aggregated with almost all combine harvesters thanks to adaptation.
New technical solutions minimize the crop losses when harvesting ripe corn with grain harvesting into the hopper of a combine, both standing straight and lying down, with shredding and spreading on the field of leaf-sticky mass.
Specifications
KMS-6
MS-8
Number of rows, pc
6
8
Working width,
4,2
5,6
productivity (corn), /hrs
10-20
12,1-25
Working speed , /hrs
5...10
5...10
Weight , g
2200
2940
Overall dimensions ,
Length
Width
Height


3,00
4,37
1,25
3,00
5,77
1,25

Handling car for harvesters VTG-4,5
It is intended for transportation of harvesters by grain harvesters on dirt roads and general purpose roads.
Specifications
VTG-4,5
Working width,
4500
Traveling speed, /hrs
20
Weight,
1593
Overall dimensions,
length
width
height
12,38
2,40
1,26


Harvesters for harvesting sunflowers
Modern technologies, used in the manufacture of drill harvesters, ensure:
- The high productivity .The stalks in the channels of adaptation are fed without slope towards its longitudinal axis. As a result, there is the possibility of the unit at higher speeds, which ensures the growth of its productivity;
- The high reliability of the construction, due to the lack of longitudinal conveyors for feeding the cut sunflower baskets to the transverse screw;
- minimizing losses. The original design of the cutting unit provides a smooth and shock-free cut of stems.
Specifications
PZS-8
PZS-12
Sun Plant-7,4
Sun Plant-9,4
Working width,
5,6
8,4
7,4
9,4
Number of rows, pc
8
12
-
-
productivity , /hrs
6,5
10
8,9/17,8
11,3/22,6
Traveling speed, /hrs
9
9
12
12
Weight,
1820
2820
2300
2700
Overall dimensions,
length
width
height
2,60
6,09
1,70
2,60
8,84
1,70

2,35
7,40
1,10

2,35
9,40
1,10

Drill harvesters for harvesting sunflower PZS
The high produced harvesters of continuous cut saves quality in any direction, easily penetrating the rows, regardless of the direction of sowing. After work in the field, only stems and leaves remain.
They favorably differ from similar harvesters of other brands by the presence of rubber-cloth aprons on the protective shoe of a rope. Aprons, mitigating the impact of sunblock baskets on the protective cover and reel, help reduce losses.
These harvesters allow you to harvest in extremely short terms, which improves the quality of the collected seeds, as well as reduces the dependence on weather conditions.
Simplicity and reliability of SUN PLANT harvesters, as well as the use of high quality materials during their manufacture, have reduced the cost and maintenance time to a minimum.
Due to its versatility and simple transition frame, harvesters can be used on any combine harvester.

TRUCK TRAILER PST-6
For the transportation of the goods on the general-purpose roads and on the field roads. It is possible to transport loose building materials , excluding rocks.
Type of pneumatic - machines - W 8-16 9.00-16 model F-277.
SPECIFICATIONS
PST-6
Bunker volume , m3
5,9
Cargo capacity , kg
6000
Speed with asphalt concrete coating , km/hours
35
Tire pressure , Pa
5,9
Overall dimensions ,
length
width
height
4,08
2,32
0,62
Tractor power , horsepower
58,8...105


Transfer-accumulator for Grain PNZ-20
For reception and accumulation the grain from the combine, its transportation and reloading on the car body
SPECIFICATIONS
PNZ-20
Bunker volume , m3
20
Hopper discharge time , min (according to the grains kind )
10...14
Working speed , m/hours
10/20
Weight , g
6000
Hydraulic pressure , MPA (kg/2)
22 (220)
Working frequency of turnover of the tractor , min -1
540
Overall dimensions ,
length
width
height
6,245/6,60
3,59/5,11
3,50/4,37


MACHINERY FOR FERTILIZER APPLICATION AND CHEMISTRY
Sprayer ORLAN 24
Used for the continuous spraying of field crops by chemical means of protection against weeds, diseases and pests, as well as the introduction of liquid mineral fertilizers. The 3000 liter sprayer tank reduces the time spent on refueling, which, together with the width of the rod at 24 meters, ensures high performance of the sprayer.

1. Autonomous hydrosystem of lifting and decomposition-assembly of rod;
2. Bravo-180S computer control system;
3. Mixer COMPAKT;
4. Set of the equipment for refueling from an open reservoir or capacity.

SPECIFICATIONS
ORLAN 24
Working width , m
24
Productivity , ha/hours
14,4...28,8
Tank volum...